NGIMS












                                                 Requesting Specific NGIMS Data



    Data Type
    The data products are simple ASCII tables. The NGIMS data consists of 5 components: Raw, Calibrated and Derived Single Species Abundances and Altitude resampled abundances. Each file spans one MAVEN orbit, covering the interval when the craft was at an altitude of 500Km or less.

    Indices, that can be used for planning data selection, tabulate information associated with each periapsis passage for which NGIMS data is available. The associated geometry is given at the time of periapsis passage.
    Calibrated Data (csv)
    Derived Data (csv)
    Altitude resampled abundances (csv)
    Scale heights and temperatures (csv)

    Retrieving Raw Data and Calibration Information
    Raw Data
    Calibration files (See SIS for explanation)

    Calibrated and derived data can be retrieved by selecting among the following data types for specified time intervals

    Data Definitions Table

    Data Types - note caveats associated with this data

       Calibrated Science Data in ion mode
       Calibrated Science Data in neutral mode
       Derived Neutral abundances (closed source - Ar, CO2, He, N2)
       Derived Neutral abundances (All Neutrals - Ar, CO2, He, N2, CO, O2, O, NO)
       Derived ion abundances (open source)
       Altitude resampled abundances
       Scale-heights and temperatures










    Start Time                               2013-12-04T15:18:24
    Enter Minimum Value =
    Stop Time                               2016-08-15T01:23:35
    Enter Maximum Value=


    Aerodetic Solar longitude Range 0 to 360                               
    Enter Minimum Value =
    Enter Maximum Value =


    Aerodetic Solar latitude Range -25 to 25                               
    Enter Minimum Value =
    Enter Maximum Value =


    Aerodetic Spacecraft longitude Range -179 to 179                               
    Enter Minimum Value =
    Enter Maximum Value =


    Aerodetic Spacecraft latitude Range -75 to 75                               
    Enter Minimum Value =
    Enter Maximum Value =


    Altitude Range 192 to 239364175                               
    Enter Minimum Value =
    Enter Maximum Value =


    Phase Angle Range 0 to 180°
    Enter Minimum Value =
    Enter Maximum Value =


    Martian Year 32
    Ls 58 to 355
    Enter Minimum Value =
    Enter Maximum Value =


    Martian Year 33
    Ls 6 to 204
    Enter Minimum Value =
    Enter Maximum Value =




    View Data

    Reset