MEDA - Mars Environmental Dynamics Analyzer - CERTIFIED
                                       Feb 19, 2021 (Ls 6.1 MY 36) to [ongoing]



                                                                                                              Location of MEDA Sensors onboard the Mars2020 rover Credit NASA/JPL-Caltech


    Goal

    The MEDA goal is to provide continuous measurements that characterize the diurnal to seasonal cycles of the local environmental dust properties (opacity, size distribution, and phase function) and their temporal response to meteorology, and the local near-surface environment (pressure, air and surface temperature, relative humidity, wind, and solar radiative forcing in the UV-visible-IR parts of the spectrum).

    The Instrument Package

    The MEDA instrument consists of a suite of sensors and a control unit, packaged in eleven enclosures:

    • Wind Sensor, WS (two detectors, WS1 and WS2, placed on two booms)
    • Air Temperature Sensor, ATS (five detectors: three of them placed on the RSM, and two more at the front of the rover body)
    • Thermal Infra-Red Sensor, TIRS
    • Relative Humidity Sensor, HS
    • Radiation and Dust Sensor, RDS (it also includes the SkyCam imager)
    • Pressure Sensor, PS (inside the Instrument Control Unit, ICU)

    Along with SKyCAM browse and images

    The wind sensors are housed in two small Booms structures mounted orthogonal to the Remote Sensing Mast (RSM) of the Rover. Each Boom provides 6 wind sensor transducer boards on the head of the main boom cylinder. Booms include front-end mixed ASICs to condition and acquire the data from the wind sensors and to communicate serially with the Instrument Control Unit (ICU).

    The Thermal-Infrared Radiation Sensor (TIRS) is also mounted on the RSM and it is composed of 5 thermopiles pointing upward and downward to measure different ground and atmosphere temperatures in different infrared bands and the solar radiation reflected on the ground (albedo).

    The Humidity Sensor (HS) is directly mounted to the RMS as well. It contains up to three capacitive sensor heads sensitive to the ambient relative humidity.

    The Radiation and Dust sensor (RDS) is mounted on the rover top deck and comprises of eight upward viewing UV photodetectors (8 photodiodes), 8 lateral viewing UV photodiodes (every photodiode looking 45º apart from the previous to cover the full 360º around the unit), a reference dark-current photodiode and an upward looking camera. The signals coming from these photodiodes and thermopiles will be routed to the ICU to be conditioned and digitized inside the ICU. The ICU will also control the camera through its power and data interfaces.

    The instrument control unit, the ICU, is mounted upside-down to the Rover Avionics Mounting Panel (RAMP), inside the rover chassis just under the top deck. It plans and controls the sensors’ data acquisition, communicating with Rover Computer Element (RCE) and temporarily storing science and housekeeping data.

    The pressure sensor (PS) is located with the ICU analog module but additionally uses a small tube to reach the Martian environment outside the rover. This tube passes through the ICU base plate, the RAMP, and into a cavity in the rover top deck. The opening is protected from dust and for planetary protection reasons by a cover that attaches to the rover top deck

    The instrument will regularly make measurements throughout the Martian day and night, over the lifetime of the Mars 2020 mission. To achieve these measurements, MEDA is designed primarily to operate from an autonomous, low-power “sleep” mode. An internal timer wakes MEDA to take observations according to a pre-determined schedule, saves the data internally, and goes back to sleep.


    Useful Publications

    Farley, K.A., Williford, K.H., Stack, K.M. et al. Mars 2020 Mission Overview. Space Sci Rev 216, 142 (2020). https://doi.org/10.1007/s11214-020-00762-y

    Rodriguez-Manfredi, J.A., de la Torre Juárez, M., Alonso, A. et al. The Mars Environmental Dynamics Analyzer, MEDA. A Suite of Environmental Sensors for the Mars 2020 Mission. Space Sci Rev 217, 48 (2021). https://link.springer.com/article/10.1007/s11214-021-00816-9

    Balaram, J., Aung, M. & Golombek, M.P. The Ingenuity Helicopter on the Perseverance Rover. Space Sci Rev 217, 56 (2021). https://doi.org/10.1007/s11214-021-00815-w


    MEDA Documents


    Software Interface Specification SIS for Raw Data (EDRs)

    Software Interface Specification SIS for processed, calibrated and derived data (RDR)

    README

    The MEDA Bundle

    Data
    MEDA science data products are ASCII text comma-separated value (CSV) tables except for SkyCam, which are two-dimensional binary image arrays. See a summary of the data.

    Raw Data

    MEDA data comes down in Science Data Frames (SDF) which contain a number of Science Data Products (SDP). These are converted into EDRs which are processed, using NAIF, calibration data and any other ancillary information needed to generate the RDR processed data products.

    Partially Processed Data
    These data products contain data from processing at an intermediate step between the raw digital numbers obtained from sensors and the generation of physical environmental magnitudes. The magnitudes provided in these files are mainly voltages, intensities and resistances. Their main purpose is to facilitate engineering evaluation of the sensors’ health and trends.

    Calibrated Data
    These data are the least processed data products at which science environmental magnitudes are provided and include pressure, humidity, wind, temperatures and radiation. When a sensor subsystem has multiple detectors, the data provided are per individual detector. The processing applied to get the data for these data products is based exclusively on pre-landing calibration and post-landing adjustments (based on observed trends). Little or no assumptions of external conditions or models are made.

    In addition to science data from the sensor, there is also a calibrated engineering data product. The magnitudes contained within this data product have two purposes: to be used in the generation of calibrated data and to help evaluate the health of MEDA from an engineering point-of-view.

    Some data products have some additional “flag” fields noting additional factors that could have an impact on the reliability of the measurements, such as shadows, noise sources or blocking objects. When those fields exist, a general convention is used in which a value of “1” represents a good condition (e. g. the possible source of noise is off), and “0” represents a bad condition

    Included in the Derived directory there is a file with “ANCILLARY” in the file name that is a second-by-second geometry data set relevant for the interpretation of the data, such as the relative position of the sun, rover location and orientation.

    Derived Data

    Derived data are what most users wanting to work MEDA’s data will want, when available for a particular sensor.

    Derived data products are processed from calibrated data products using assumptions or models. For some sensors, this is necessary to provide a unique magnitude when there are several detectors involved (e. g. pressure or wind). For other sensors, such as TIRS, there are further assumptions on external conditions not used in calibrated data products. Not all sensors have derived data products.

    In addition to science derived data, there is also a special data product, called ancillary data, that contains geometry information that may have an impact in the sensors’ measurements, such as the position of the sun, RSM head or rover speed. This information is calculated using the NAIF SPICE tool kit. It is provided as part of the MEDA dataset for convenience.

    SkyCam Data
    Images taken by SkyCam, both raw and higher-level data products, such as images corrected radiometrically are included. Browse products are also available.


    Selected data can be retrieved in 2 ways

    1) Downloading an index, selecting components and uploading your selection.

    Indices that tabulate information associated with each product are available.

    a. Select your index

    Calibrated Indices

    ATS - Air Temperature Sensor (csv)

    ENG - Engineering (csv)

    PS - Pressure Sensor (csv)

    RDS - Radiation and Dust Sensor (csv)

    RHS -Relative Humidity Sensor (csv)

    TIRS -Thermal Infrared Sensor (csv)

    WIND – Wind Sensor (csv)

    Skycam — The documentation for skycam is included in the Software Interface Specifications document for all the cameras on MARS2020 (See section 2.6 for camera characteristics). Also see README.   Browse images are available for files corresponding to various levels of processing.
    An index (csv) that combines browse images with corresponding data levels is provided.

    Derived Indices

    ANC – Ancillary Data (csv)

    PS – Pressure Sensor Data (csv)

    RHS-Relative Humidity Sensorv (csv)

    TIRS -Thermal Infrared Sensor (csv)

    WIND – Wind Sensor (csv)


    b. Sort and make your selection

    c. Upload the URN values from your revised index (note the total uncompressed file size before requesting)

    2) Selecting specific parameters and requesting limited data files

    Downloading annual collections of data
    MEDA CALIBRATED (3.2 GB)MEDA DERIVED (1.0 GB)MEDA PROCESSED (7.1 GB)MEDA SKYCAM (9.1 GB)


    Citing datasets for publication
    J.A. Rodriguez-Manfredi et al. (2021), The Mars Environmental Dynamics Analyzer, MEDA, NASA Planetary Data System, DOI 10.17189/1522849

    Spice - Archived SPICE ancillary data providing observation geometry (positions, orientations, instrument pointing, time conversions, etc.) are available from the PDS NAIF Node.











































sure-sensor_derived.htm