ACC












                                                 Requesting Specific ACC Data



    The Mission Time Line (csv) can be used to select time intervals of interest. This file contains geometry parameters that are associated with the periapse of each orbit and supporting notes that will be updated and enhanced over time.

    Data Type

    The data products are simple ASCII tables.

    The data consist of a file for each periapsis passage, give start time and stop time and consist of tables that contain seconds from periapse, areodetic latitude, east longitude, local solar time. Solar zenith (deg), areodetic altitude, density (KG/KM**3) and sigma density (KG/KM**3).

    An index (csv), that can be used for planning data selection tabulates information associated with each periapsis passage for which accelerometer data was derived is available. The associated geometry is given at the time of periapsis passage.

    Data can be retrieved by selecting among the following data types for specified time intervals


    Start Time                               2014-10-07T03:08:20
    Enter Minimum Value =
    Stop Time                               2016-02-12T22:50:28
    Enter Maximum Value =


    Solar longitude Range 0 to 360                               
    Enter Minimum Value =
    Enter Maximum Value =


    Solar latitude Range -25 to 25                               
    Enter Minimum Value =
    Enter Maximum Value =


    Spacecraft longitude Range 0 to 360                               
    Enter Minimum Value =
    Enter Maximum Value =


    Spacecraft latitude Range -75 to 75                               
    Enter Minimum Value =
    Enter Maximum Value =


    Altitude Range 120 to 183                               
    Enter Minimum Value =
    Enter Maximum Value =


    Martian Year 32
    Ls 209 to 360
    Enter Minimum Value =
    Enter Maximum Value =


    Martian Year 33
    Ls 6 to 109
    Enter Minimum Value =
    Enter Maximum Value =




    View Data

    Reset